Well-designed Eye Tattoo Removal - Picosecond laser tattoo removal ,freckle removal , pigment removal , skin rejuvenation system – Sano
Well-designed Eye Tattoo Removal - Picosecond laser tattoo removal ,freckle removal , pigment removal , skin rejuvenation system – Sano Detail:
What is picosecond laser :
Pico second laser is the latest new generation technology for aesthetic use. Through trillions of a second and powerful laser energy to grind the pigment in the skin tissue to reach the result of completely tattoo
removal and pigment in all type of skin color. Through specialized fractional lens, Pico second laser can convert laser energy into gentle pressure to create new collagen by squeezing cells and activating the
natural cell without burning or damaging the skin.
Main Function
Treatment advantage
(1) High energy & short pulse duration: Energy can be released into the skin tissue in trillions of trillions of seconds, which can break down the pigment into smaller pieces. Compared
with the traditional Q: switch laser, the pigment can be absorbed more easily and faster.
(2) Low risk & painless: Since the pulse duration has been reduced a thousand times, skin damage has been reduced. Treatment is safer and less painful.
(3) There was no anesthesia and inflammation during the treatment.
(4) Fast: For tattoo removal, traditional Q: switching lasers usually require 6-8 treatments. With a picosecond laser, only 3-4 treatments are needed to completely remove it.
(5) High performance: Using picosecond laser technology can completely remove tattoos and pigments.
(6) Try any skin type, no obvious pigmentation after treatment.
Operation Steps
1、Clean the treatment area, if you have hair, you need to remove it
2、Apply anesthetic cream as needed
3、Disinfect the treatment area
4、Adjust the treatment parameters according to the parameter table
5、All treatments are recommended not to break the skin or ooze blood, which can greatly reduce the risk of melanin deposition, and the number of treatments will increase accordingly.
When starting treatment, use low frequency first (let the machine warm up first to reduce the damage to the machine), and slowly close to the skin to continuously emit light. Then slowly raise up to find a suitable distance to start treatment. After a few minutes, you can increase the frequency. When you start treatment, you must first get close to the skin to continuously emit light, and then slowly raise the treatment head, so as to avoid the sound from scaring the patient It can also find the best treatment distance. When the blasting sound is the loudest, it is when the energy is focused. In many cases, the focused energy is not used, because the focused energy will bleed, and the probability of coloration is very large. Generally 2 minutes after treatment The skin will flush and the effect is best. Focusing on energy: The point with the greatest energy can be judged by listening to the sound, and the point where the sound is the loudest and the most brittle can be understood by beginners.
6.It is recommended to use repair products and products that inhibit pigmentation after treatment
7.After treatment, you must enter physical sunscreen, masks, umbrellas, etc.
8.The general treatment interval is about one month, the parameter table has the recommended number of treatments, and the doctor determines whether to add treatment according to the patient’s recovery.
Laser type |
Pico second ND: YAG Laser |
Energy Level |
Single Mode: Max 400mj (532nm), Max 800mj (1064nm) Double Mode:Max 800mj(532nm), Max 1600mj (1064nm) |
Pulse width |
750ps |
wavelength |
1064nm,532nm,585nm(option),650nm(option) |
Frequency |
1-10hz |
Spot size |
2-10mm |
Dimension |
107*50*118CM |
weight |
115KG |
Postoperative care
1.After treatment, there may be slight pain, white skin surface, epidermal bleeding, transient redness, swelling, blackening or even purpura. They can be absorbed by themselves without being too nervous.If there is a scab that will fall off on its own within 7–14 days, it should not be removed artificially, so as to avoid delaying skin healing and forming pigmentation.
2.Due to individual differences or climate changes, within a few days after treatment, the treatment area must not be in direct contact with water or other solutions to prevent infection. Try to eat less spicy food, excessive drinking, and smoking.
3.Very few individuals may have pigmentation on their skin after treatment, which usually subsides after 1-3 months.
4.After the operation, try to avoid activities in the sun and exposure, in order to avoid the production and increase pigmentation. Physical sunscreen works best
5.If any abnormal phenomenon is found after the operation, please go to the outpatient consultation and treatment in time.
Exhibition
We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below:
Package and delivery
We package the machine in export standard metal box, and we use DHL, FedEx or TNT to delivery the machine to you by door to door service.
Sunny Zhao Daria Jia
Sunny@sanhebeauty.com Daria@sanhebeauty.net
+86 18813196949 +86-18831450595
Product detail pictures:
Related Product Guide:
We attempt for excellence, company the customers", hopes to be the top cooperation team and dominator company for personnel, suppliers and customers, realizes price share and continual marketing for Well-designed Eye Tattoo Removal - Picosecond laser tattoo removal ,freckle removal , pigment removal , skin rejuvenation system – Sano , The product will supply to all over the world, such as: Australia , UAE , Iran , With a wide range, good quality, reasonable prices and stylish designs, our items are extensively used in this field and other industries. We welcome new and old customers from all walks of life to contact us for future business relationships and achieving mutual success! We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.
By Dale from Canada - 2018.09.29 13:24
The factory technical staff not only have high level of technology, their English level is also very good, this is a great help to technology communication.
By John biddlestone from Macedonia - 2017.12.09 14:01