980nm diode laser for vascular removal

Short Description:

980nm laser is the optimum absorption spectrum of Porphyrin vascular cells. Vascular cells absorb the high-energy laser of 980nm wavelength, solidification occurs, and finally dissipated.

To overcome the traditional laser treatment redness large area of burning the skin, professional design hand-piece, enabling the 980nm laser beam is focused onto a 1-3 mm diameter range, in order to enable more focused energy to reach the target tissue, while avoiding burn the surrounding skin tissue.

Product Detail

contact

Product Tags

vascular spider vein removal diode laser 980 nm (2)

Treatment Theroy

980nm laser is the optimum absorption spectrum of Porphyrin vascular cells. Vascular cells absorb the high-energy laser of 980nm wavelength, solidification occurs, and finally dissipated.

Laser can stimulate the dermal collagen growth while vascular treatment, increase epidermal thickness and density, so that the small blood vessels are no longer

exposed, at the same time, the skin's elasticity and resistance is also significantly enhanced.Indications

Working Principle:
1. 980nm laser is the optimum absorption spectrum of Porphyrin vascular cells. Vascular cells absorb the high-energy laser of 980nm wavelength, solidification occurs, and finally dissipated.
2. To overcome the traditional laser treatment redness large area of burning the skin, professional design hand-piece, enabling the 980nm laser beam is focused onto a 0.2-0.5mm diameter range, in order to enable more focused energy to reach the target tissue, while avoiding burn the surrounding skin tissue.
3. Laser can stimulate the dermal collagen growth while vascular treatment, increase epidermal thickness and density, so that the small blood vessels are no longer exposed, at the same time, the skin's elasticity and resistance is also significantly enhanced.
4. The Laser system based on the thermal action of the laser. The transcutaneous irradiation (with a penetration of 1 to 2 mm in the tissue) causes tissue selective absorption by hemeglobin (hemoglobin is the main target of the laser).

Three treatment head

Treatment procedure:

Clean the treatment area, the hair area needs to be removed

Apply anesthetic cream to the treatment area as needed

The patient needs to wear protective goggles, the operator needs to wear protective glasses.

Adjust the parameters. Generally the vascular has thick or thin, and the depth affected a lot for the parameter setting, we suggest you adjust the parameter according to the patient’s skin reaction, if the skin reaction is very obvious and capillary become white, it indicates the effect is better. If the skin has little reaction, it indicates the energy is not enough, so need to increase the energy. And start from low-energy, then find a most suitable energy for treatment, if the skin become redness which means good

After treatment, apply ice for 10-20 minutes. It is recommended to apply repair products or scald ointment to the treatment site to speed up skin recovery.

Don’t touch water in 24 hours. The treatment is generally 1-4 times, and the course of treatment is maintained, with an interval of about one month each time(until the wound recovers)

laser vein removal machine paremeter

Laser type	Semi conductor generator
Laser wavelength	980nm
Function	Remove spider veins, vascular
Output power	200W
Work mode	Pulse mode
Laser energy	50W
Pulse Width	20ms-100ms
Pulse delay	0，180ms-900ms
Treatment handle	Focus handle
Output method	Fiber output
Machine size	*403233CM*
Net weight	8Kg
Trolley size	*676632CM*
Gross weight	15Kg

Machine picture:

Before and after pictures

Exhibition

We have sold a lot of products to all over the world. Our company participates in many exhibitions every year, such as Italy, Dubai, Spain, Malaysia, Vietnam, India, Turkey and Romania. There are some photos below: